ArchitectBoy is reader-supported. When you buy via the links on our site, we may earn an affiliate commission at no cost to you.

A side view and secure method for removing an anchor bolt from a thin wall.

Everything You Need to Know about Laser Levels

What is a Laser Level?

A laser level is a widely used tool in the construction industry. It has also a great use in the surveying industry. Typically, this tool is used for leveling and aligning different applications. Here a constant green or red line is constantly projected onto a surface. 

The surface can be either horizontal or vertical. When it comes to professional construction work, the laser levels have wide applications. The working method of the laser level is pretty much straightforward. 

The device mainly emits light via the optical amplification process which is fully based on the stimulated emission of electromagnetic radiation. No wonder, this tool will improve your overall accuracy of the work. 

Types of Laser Levels

The laser levels are of different types- Fixed laser level, Self-leveling lasers, rotary laser level, magnetic laser level, digital level, etc. There are some basic differences between them which are discussed below.

Fixed Laser Level: 

In a fixed laser level, you will find a laser diode that is mainly attached to a spirit level for serving as a pointer. To level the dot or line, there are vials. One of the key things to note here is, that you will not be able to get the expected level of accuracy from this laser level. So, this tool is mostly used in small projects. 

Self-Leveling Lasers:

When it comes to getting more accurate and faster results from the laser levels, you can use the self-leveling lasers which are also widely known as the pendulum levels. This tool doesn’t depend on a person for aligning it. 

There is a set of laser diodes that are mounted on a pendulum. When the pendulum is still and in its natural position, vertical or leveled dots and lines are emitted by the diodes. 

In order to level a wall, vertical green-emitting laser light is positioned across it, and the measurement is verified by a human hand.

Rotary Laser Level: 

The last but not the least type of laser is the rotary laser level which is also known as the mechanically leveled laser. Typically, this tool will give you a complete 360-degree read. It is mainly positioned in the center of the Jobsite where its laser beam is cast all around so that you can get the desired 360-degree measurement. 

With the help of a mechanical gyroscope, it senses the earth’s center. Besides, there is an electronic servo motor that will establish the leveling of the diodes from where lasers are finally emitted. In most cases, the diode is set in the center for rotating and creating a vertical 360-degree line. 

Magnetic Laser Level:

Another type of laser level popular in the market these days is a magnetic laser level. Typically, in this type of laser level, you will find a magnetic base. Needless to say, a magnetic laser level will give you even more accuracy and perfection. 

Digital Laser Level

With the advancement of modern technology, now you can have a digital laser level. This tool can provide you with some added advantages. For instance, the digital level is quite easier to read. Besides, it will give you excellent ease of use. Many models come with the automatic data storage feature which will eliminate booking and other relevant errors. 

How to Use a Laser Level

Using a laser level is not rocket science at all. If you know the right steps to follow, you will be able to get the job done without any hassle. In a general sense, lasers are quite faster and more convenient to operate. However, to get the ultimate user experience, always try to buy the best laser level for builders

Understanding Laser Levels

Below I will give you a step-by-step guide that will help you to use a laser level correctly. 

  • Step-1: To operate the tool properly, you can use a laser-level tripod. This is an assisting accessory where you can set your main machine. In most cases, tripods come with adjustable legs. Besides, you may find a built-in leveling bubble. By using the bubble and adjusting the legs make sure that your laser is properly level on the tripod. 
  • Step-2: Now, you need to switch on the laser. Make sure that the bubble and vial are properly aligned and then calibrate it. However, if you are working with a self-leveling laser, it will get the job done for you. In that case, you may need to allow some time for that. 
  • Step-3: If you follow the above-mentioned steps correctly, a level beam will be produced onto the surface where you are currently working on. 
  • Step-4: Now, it’s time to identify a point on the ground at your expected level of height, and then you must project the laser onto the targeted surface. When it comes to the beam, it can be dots, lines, or both. It depends on your laser. 
  • Step-5: When you have a laser detector, you must fix it to a leveling rod. You can use a clamp or laser-level pole for it. You need to slide it up and down and stop doing that upon listening to the beeps. The beep means, the detector has identified the beam. 
  • Step-6: Finally, you should fasten the detector in the right place. Then complete your essential adjustments. 

What is a Laser Level for Grading

A grade laser level, also known as a slope laser level is a widely used measurement tool in the construction and surveying industry. Typically, the laser beam indicator of this tool is fixed on a tripod. 

The tripod is properly leveled based on the precision you are targeting to achieve. Typically rotary laser levels are used for grading purposes. The rotary laser level for grading will indicate a green or red beam if you secure it along the horizontal or vertical axis. 

How to Use a Laser Level for Grading

If you know how to use a laser level for one purpose, it is comparatively easier for you to learn about using it for grading. As I already mentioned all the steps of how you can use a laser level, you will be able to use it for grading. 

The First 6 steps I already have mentioned above are the same here as well. After adjusting the laser detector, you should set the grade rod at several spots on the construction site. Now, you need to take the reading to find out whether the ground is below or above the targeted point. 

For finding the original reading, you may need to dig the ground or even lift the rod. Then all you need to do is mark the spot. The bottom of the grade is the bottom of the grade rod. To mark the spot, you can use a stick. 

Five distinct 3D measurements of the interior are taken for laser leveling, with a green-emitting laser light laid horizontally across the floor and a wall.

Frequently Asked Questions (FAQs)

How do laser levels work?

Answer: Typically it involves a device from which light is emitted via an optical application process. The stimulated emission of electromagnetic radiation plays a very important role in overall laser leveling. 

What is laser leveling?

Answer: When it comes to labeling and aligning applications in the construction and surveying industry, the most widely used tool is a laser level. In this tool, there is a control laser beam projector that can be fixed on a tripod. 

Where to buy a laser level?

If you need to buy a laser level, you can do it very conveniently nowadays. Because you will find it in most of the popular online shops including Amazon. There you will find outstanding products such as Topcon laser level.

What is a rotary laser level?

A rotary laser level is a tool that can spin a beam of light faster and complete a 360-degree vertical or horizontal plane. You can use it internally or as an outdoor laser level whatever you want. 

Do I need a laser level for tiling?

When you talk about the tiling, accurate angles must be achieved for the ultimate perfection. So, to achieve a higher level of perfection and accuracy in tiling, you need to have a laser level. 

Wrapping Up!

A laser level is a very useful tool in the construction and surveying industry. It has a wide range of applications in the overall construction industry. There are several types of laser levels. Different models come with different levels of functionality. 

When it comes to using a laser level for building or grading, it is very easy. But you need to know the right steps. That said, using a quality product will bring more perfection to your measurement.